CAD
Ikelite - RC1 Olympus & Panasonic TTL Receiver for DS Strobes
- 1 x RC1 Receiver
- 1 x Connector protector # 0301.12
Top Product Features:
- Enjoy true Olympus or Panasonic LUMIX TTL strobe exposure via fiber optic connection with your compatible Ikelite DS strobe.
- With the RC1 TTL Receiver and a compatible camera with RC flash mode, actual exposure data is calibrated and communicated directly by the camera. This is far more accurate and consistent than "slave TTL" modes built into some underwater strobes which watch the camera's built-in flash and react.
- An individual RC1 TTL Receiver and compatible fiber optic cord is needed for each strobe. Use of two strobes requires two receivers. See strobe and cable compatibility information below.
- This product attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to a housing bulkhead. This receiver is not compatible with non-Ikelite strobes or non-digital Ikelite strobes.
- An individual Converter is needed for each strobe. Use of multiple strobes requires one Converter per strobe. The Converter supports DS50, DS51, DS125, DS160 and DS161 strobes.
- Part Type: TTL Converter
RC Mode TTL Strobe Exposure
The Sensor makes DS Strobes compatible with the Olympus and Panasonic LUMIX RC flash mode, providing automatic TTL exposure. For accurate performance set the DS strobe to ﾓTTLﾔ and the cameraﾒs flash mode to ﾓRCﾔ. Using the cameraﾒs flash exposure compensation controls to make fine tuned adjustments to the strobeﾒs intensity.
Manual Strobe Exposure
The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model). Make sure the cameraﾒs flash mode is set to manual. Choose the minimum flash output necessary in the camera to trigger the DS strobe. This will conserve the cameraﾒs battery power.
Camera & Housing Compatibility
Ikelite Housing Models:
- Olympus OM-D E-M10 Mark III in Ikelite Housing # 6950.13
- Olympus Stylus 1s in Ikelite Housing # 6139.51
- Olympus Tough TG-3, TG-4 in Ikelite Housing # 6233.03 / 6233.04 / 6233.05
- Olympus Tough TG-5 in Ikelite Housing # 6233.06 / 6233.07
Non-Ikelite Housing Models:
- Olympus OM-D E-M1 Mark II with FL-LM3 flash in Olympus or Nauticam Housing
- Olympus OM-D E-M5 Mark II with FL-LM3 flash in Olympus, Nauticam, or Isotta Housing
- Olympus OM-D E-M10 in Nauticam Housing
- Olympus OM-D E-M10 Mark II in Nauticam Housing
- Olympus OM-D E-M10 Mark III in Nauticam Housing
- Olympus Tough TG-3, TG-4 in Olympus, Nauticam, or Recsea Housing
- Olympus Tough TG-5 in Olympus, Nauticam, Isotta, or Recsea Housing
- Panasonic LUMIX GH3, GH4 with DMW-FL70 flash in any housing that supports use of the DMW-FL70 flash
- Panasonic LUMIX GH5, GH5s with DMW-FL70 flash in Nauticam or any housing that supports use of the DMW-FL70 flash
- Panasonic LUMIX GX8 with DMW-FL70 flash in Nauticam Housing
Fiber Optic Cord Compatibility
- Ikelite Fiber Optic Coiled Cord # 4501
- INON Optical D Cable "Non-wireless type" L-Connector
- SEA&SEA Fiber Optic Cable (L-type) # 50107
- SEA&SEA Fiber Optic Cable II # 50128
- Olympus UW Fiber Optic Cable PTCB-E02
- Nauticam Optical Fiber Cable # 26211 Nauticam to INON
- Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea
Consult with your housing manufacturer for information on what type of fitting is provided at the housing end. The fiber optic ports on Ikelite housings are made to the same standard as SEA&SEA and Olympus brands.
Strobe Compatibility
- Ikelite DS50 above serial # 70000
- Ikelite D51
- Ikelite DS125 above serial # 5000
- Ikelite DS160, DS161
- Ikelite DS200 above serial # 7163
This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes.
| Size | M |
|---|---|
| Stock | 2 |
| Lead Time | 6 |
| Territory | WORLDWIDE |
| Popularity | 1 |
| Warranty Note | 1 Year by Ikelite |
| Camera Brand | Ikelite |
| Camera Model | TG-7 |
Warranty Terms
Mozaik is an authorized dealer of each and every brand offered for sale. All products are sold with a manufacturer’s warranty. The terms, limitations and period of the warranty are solely determined by the manufacturer and are marked on the product page and/or on the manufacturer’s web site.
Implementing the warranty can be done either through us or directly with the manufacturer. We are always here to help with any issue that may arise and will be happy to take care of any repairs or check-ups for you. Read more..
Return Policy
If for any reason you are not satisfied with a product you purchased you can request to return it within 60 days of the original delivery date, subject to the following conditions Read more..
Canadian Customers
All orders shipping to Canada will be charged local sales tax according to the province ( GST / PST / HST).
Mozaik is responsible and will pay all import fees (including duty and brokerage fees). Our broker will take care of any such fees before the product reaches your door.
Any accidental charges will be reimbursed.
US Customers
Orders shipping to the USA will ship through our US logistics center in Blaine, WA thus free of any border fees.
International Customers
We do not charge taxes, yet, you may be subject to local sales tax and customs duties in your country.