Assembling The Uni Tray

Congratulations on getting your Uni Tray - modular tray system for underwater cameras!

In order to help you get started as quickly as possible, we have created this Quick-Start guide for assembling your Uni Tray

The first thing you wan't to do is make sure all the parts are there. If something is missing, please Contact Us and let us know!
* This guide will be directed towards the Full Uni Tray Set but you can use it to assemble other variations of the Uni Tray.


Parts included in the package:

  • 1 x 11" long Delrin Tray
  • 2 x Grips with 3/4" Locline arms and top YS-Mount
  • 1 x Clip to mount Nauticam lens holder
  • 2 x standard 1/4"-20 screws
  • 2 x Ikelite 12-24 screws
  • 1 x Set of washers
  • 1 x Wrench for tightening screws
  • 1 x Nauticam lens holder
  • 1 x Ball Mount Adapter
  • 1 x Clamp
  • 1 x Single Ball Arm
  • 1 x Coil Lanyard
  • 1 x Bonica Bag

 

Putting it all together

The first thing you want to connect is the lens holder to one of the arms. Look for the small thread on the side of the arm, just above the blue grip, and insert the double sided screw half way in, using the Allen key.

Once the screw is in, insert the small spacer, and screw on the lens holder itself.

Grab the other arm and attached the ball mount using the correct screw, as shown in the image below.

Attach both arms to the tray, using the relevant screws as shown below.

Attach the coil's D-Ring to the dedicated hole in the Uni Tray, and close it tightly.

That's it! You're good to go!

To attach your camera to the tray, simply use the remaining screws and position the housing to your liking.

If any of this wasn't clear or if you are missing a part, please Contact Us so we can help you assemble your gear!