 |
 |
 |
|
Complete Digital Strobe System with Auto Exposure Control
The Bonica Neon-XP Strobe is a powerful underwater strobe light. Since the strobe will fire with 4 different pre-flash setting as well as no pre-flash it works with any underwater digital or film camera that has a built-in flash. It fits the Bonica Snapper-XP perfectly. It will enhance the picture quality in poor lighting conditions. It also reduces the backscatter problem that normally will occur when using a camera with built-in flash.
Along with manual control a microprocessor controlled exposure sensor automatically regulates the intensity of the flash to provide proper exposure at apertures from f/2.0 to f/4.0. Say farewell to trial-and-error lighting adjustment, it puts point-and-shoot simplicity back into the hands of digital photographers.
The Strobe also has a fully adjustable arm and flash head that swivels 360°. This will allow you to aim the flash in any direction. The Neon Strobe Light has dual sensors, this allows the strobe to fire simultaneously when the camera flashes without the need of a sync cord.
Double silicone seal rings give better protection from water leakage. A second Strobe Light can be attached on the support tray if additional lighting is needed.
|
|
|
|
|
|
 |
|
 |
|
Product Features
Includes Tray & Arm & Ball Joint
- Slave will fire with 4 different pre-flash settings as well as no pre-flash
|
- Microprocessor controlled exposure sensor automatically regulates the intensity of the flash
|
|
- Recycle time of 0.3 to 5 seconds
|
- Up to 120 flashes with full power batteries
|
- 5700° kelvin color temperature
|
|
|
|
 |
|
 |
|
|
|
